|
KT Brush Motor
|
|
 |
|
|
|
|
您现在的位置：主页 >>
Products >>
KT Brush Motor
>> KT Brush Motor |
KT Brush Motor |
| 作者:Gu runjun 来源:Wuxi Xingnuo Electric Co., Ltd. 更新:2015-08-28 点击：
|
| KT Series |
| Technical parameters: |
Technical parameters:
1.Voltage range: 220V-440V
2.Power range: 2kW-20kW
3.Speed: 1,500 (1,800) r/min (50Hz/60Hz)
4.Power factor: 0.8 (lagging) |
| Comply with the relevant standards: |
1.IEC60034-1
2.GB755
3.BS5000
4.NEMA MG1-22
5.CSA22-2
6.CDE0530
7.CE standard |
International Electrotechnical Commission standard
national rotary motor standard
British Standard
North American standard
Canadian Standard
German standard |
Product Features:
1.Unique structure, easy maintenance
2.Strong resistance to adverse environments --- patented technology
3.Short production cycle, fast delivery
4.Main machine failure rate of less than 0.2%
Model Description: take KT-5 for example
KT --- indicates Xingnuo KT generator series
5 --- indicates the generator power;
Technical parameters: |
Rated frequency:
Rated speed:
Power factor:
Rated voltage:
Voltage adjustment range
Steady-state voltage regulation rate
Transient voltage regulation rate
Fluctuation rate
Recovery time
Line voltage sine wave distortion
Ability to withstand over-speed:
Ability to withstand overload:
Ability to withstand over-current:
Self-excitation mode
Winding temperature rise: |
50Hz (60Hz)
1,500 (1,800) r/min
0.8 (lagging)
200-690V
> 10%
≤±1%
≤-15% 20%
≤±1%
≤1s
≤3%
20% 2min
110% 1h
150% 2min
with brush and self-excitation (AVR)
<80K (resistance method) |
Features:
1. Xingnuo main machine has a failure rate of less than 0.2%
Since being launched to the market in 2004, the failure rate of the main machine has been less than 0.2%
Products enjoy a high reputation for reliability and long service life
Xingnuo has initially established a global joint warranty mechanism to provide joint warranty for exported Xingnuo generators
2. Stator patented technology
The end of stator coils adopts H insulation film and the insulating along the root of the wire for uniform half-stack package according to the different coil ends extruding from the notch, to improve the dielectric strength and mechanical strength of the end part.
The ends of the stator and each bundle of the coil have been processed; the lead end of each bundle of coils has been reshaped.
At the end of stator of each generator, an insulating end cap is added, and each bundle of re-shaped coils is effectively fixed to the insulating end cap, so that the end coil forms an integral with excellent strength, to effectively prevent and withstand the impact from sudden load and short circuit, which may then cause the stator end to fall apart. |
（责任编辑：管理员）
|
|
上一篇文章：